Quick Start

Launch the Driver

# Source ROS2 environment, replace <distro> with your ROS2 distribution
source /opt/ros/<distro>/setup.bash
# If built from source, overlay the workspace (Deb package users can skip)
# Replace <workspace> with your workspace path, e.g., ~/wujihandros2
source <workspace>/install/setup.bash

# Launch the driver
ros2 launch wujihand_bringup wujihand.launch.py

On successful launch, you will see the following output:

[wujihand_driver]: Connected to WujiHand (right)
[wujihand_driver]: WujiHand driver started (state: 1000.0 Hz, diagnostics: 10.0 Hz)

Verify Operation

Open a new terminal and check the joint states:

# Source ROS2 environment, replace <distro> with your ROS2 distribution
source /opt/ros/<distro>/setup.bash
# If built from source, overlay the workspace (Deb package users can skip)
# Replace <workspace> with your workspace path, e.g., ~/wujihandros2
source <workspace>/install/setup.bash

ros2 topic echo /hand_0/joint_states --once

Run Demo

# Wave demo: fingers curl and extend in sequence
ros2 run wujihand_bringup wave_demo.py

When multiple hands are connected, specify the target hand with --ros-args -p hand_name:=<hand-name>. See Multi-hand Configuration for details.

Launch RViz Visualization

ros2 launch wujihand_bringup wujihand.launch.py rviz:=true

Result

Overview

Hardware

Software

More

Launch the Driver

Verify Operation

Run Demo

Launch RViz Visualization

​Launch the Driver

​Verify Operation

​Run Demo

​Launch RViz Visualization

Launch the Driver

Verify Operation

Run Demo

Launch RViz Visualization