Configuration

Launch Commands

Command	Description
`ros2 launch wujihand_bringup wujihand.launch.py`	Launch driver only
`ros2 launch wujihand_bringup wujihand.launch.py rviz:=true`	Launch driver with RViz visualization
`ros2 launch wujihand_bringup wujihand_dual.launch.py`	Launch and auto-connect both hands

Configurable Parameters

Handedness (left/right) is automatically detected from hardware. No manual specification required.

Parameter	Default	Description
`hand_name`	`hand_0`	Namespace for distinguishing multiple hands. Example: `ros2 launch wujihand_bringup wujihand.launch.py hand_name:=my_hand`
`serial_number`	`""`	Device serial number (auto-detect if empty)
`hand_side`	`""`	Connect by handedness when no serial_number: `""` (unique device), `left`, `right`
`name_by_handedness`	`false`	When true, roots topics and services under `/hand_<handedness>/`, overriding `hand_name`. Dual-hand launch enables this automatically
`publish_rate`	`1000.0`	Joint state publishing rate (Hz)
`filter_cutoff_freq`	`10.0`	Low-pass filter cutoff frequency (Hz)
`diagnostics_rate`	`10.0`	Diagnostics publishing rate (Hz)
`rviz`	`false`	Whether to launch RViz visualization

Multi-hand Configuration

When controlling multiple dexterous hands simultaneously, use serial numbers and namespaces to distinguish them.

List Connected Device Serial Numbers

List the serial numbers of all WujiHand devices currently on the USB bus, then plug them into the serial_number parameter in the launch commands below:

ros2 run wujihand_driver wujihand_list

If opening a new terminal, you need to source the ROS2 environment again

# Source ROS2 environment, replace <distro> with your ROS2 distribution
source /opt/ros/<distro>/setup.bash
# If built from source, overlay the workspace (Deb package users can skip)
# Replace <workspace> with your workspace path, e.g., ~/wujihandros2
source <workspace>/install/setup.bash

# Terminal 1: Launch left hand
ros2 launch wujihand_bringup wujihand.launch.py \
    hand_name:=left_hand serial_number:=ABC123

# Terminal 2: Launch right hand
ros2 launch wujihand_bringup wujihand.launch.py \
    hand_name:=right_hand serial_number:=DEF456

Launch Both Hands with One Command

One command auto-discovers and connects every plugged-in hand — no serial numbers needed. Each hand is named by its detected handedness, publishing topics under /hand_left/* and /hand_right/*:

ros2 launch wujihand_bringup wujihand_dual.launch.py

Optional visualization:

# One RViz window per hand
ros2 launch wujihand_bringup wujihand_dual.launch.py rviz:=true

# A single Foxglove Bridge
ros2 launch wujihand_bringup wujihand_dual.launch.py foxglove:=true

Run Multi-hand Demos

When running demo scripts in a multi-hand environment, specify the target hand with --ros-args -p hand_name:=<hand-name>:

# Run wave demo on the left hand
ros2 run wujihand_bringup wave_demo.py --ros-args -p hand_name:=left_hand

# Run wave demo on the right hand
ros2 run wujihand_bringup wave_demo.py --ros-args -p hand_name:=right_hand

The hand_name must match the name specified when launching the driver.

Topic Namespaces

After launch, each hand has its own topic namespace:

# Left hand topics
/left_hand/joint_states
/left_hand/joint_commands
/left_hand/hand_diagnostics
/left_hand/robot_description
/left_hand/tf
/left_hand/tf_static

# Right hand topics
/right_hand/joint_states
/right_hand/joint_commands
/right_hand/hand_diagnostics
/right_hand/robot_description
/right_hand/tf
/right_hand/tf_static

Joint Identification

The dexterous hand has 20 joints (5 fingers × 4 joints per finger).

Finger and Joint IDs

Service Calls use finger_id and joint_id:

Parameter	Values and Meanings
`finger_id`	0: Thumb 1: Index 2: Middle 3: Ring 4: Pinky 255: All fingers
`joint_id`	0-3: Individual joints (0 → 3: proximal → distal) 255: All joints

Joint Name Format

Topic Control uses full joint names: {handedness}_finger{1-5}_joint{1-4}

Index	Joint Name (handedness=right)	Finger
0-3	right_finger1_joint1~4	Thumb
4-7	right_finger2_joint1~4	Index
8-11	right_finger3_joint1~4	Middle
12-15	right_finger4_joint1~4	Ring
16-19	right_finger5_joint1~4	Pinky

Index Calculation

index = finger_id * 4 + joint_id

For example: The index finger (finger_id=1) third joint (joint_id=2) has index 1 * 4 + 2 = 6.

Overview

Hardware

Software

More

Launch Commands

Configurable Parameters

Multi-hand Configuration

List Connected Device Serial Numbers

Launch Both Hands with One Command

Run Multi-hand Demos

Topic Namespaces

Joint Identification

Finger and Joint IDs

Joint Name Format

Index Calculation

​Launch Commands

​Configurable Parameters

​Multi-hand Configuration

​List Connected Device Serial Numbers

​Launch Both Hands with One Command

​Run Multi-hand Demos

​Topic Namespaces

​Joint Identification

​Finger and Joint IDs

​Joint Name Format

​Index Calculation

Launch Commands

Configurable Parameters

Multi-hand Configuration

List Connected Device Serial Numbers

Launch Both Hands with One Command

Run Multi-hand Demos

Topic Namespaces

Joint Identification

Finger and Joint IDs

Joint Name Format

Index Calculation